â„–18117029[Quote]
OHNONONONONONO…
â„–18117053[Quote]
try turning it off and on again o algo
â„–18117116[Quote]
You're the chimp here
â„–18117126[Quote]
>>18117092what the fuck i cant delete it anymore
â„–18117133[Quote]
ill just sage it
â„–18117149[Quote]
OHHHHHHNONONONONONONONONONONONONO
â„–18117154[Quote]
>>18117133And I'll 'gate it
â„–18117174[Quote]
opsec level: get bumped buddy
â„–18117198[Quote]
>>18117168Relax, my IP is 192.168.0.4, I'm OP's neighbor!
â„–18117209[Quote]
Do nusoicucks really? Keeeeeeek kekekekekeke
â„–18117214[Quote]
>>18117209Wait this is the wrong theard
â„–18117219[Quote]
stop
â„–18117590[Quote]
This is Chimp, an old Linux-based utility for the original Xbox (not 360). People boot it on a modded or softmodded console to back up the EEPROM, lock or unlock the hard drive, and prep a bigger replacement HDD. Nothing on that screen is an error. It's the normal boot log. The DHCP line just means no router answered, so it gave itself 192.168.0.3. The "press Enter" line is a standard Linux spare console and can be ignored. After this text, Chimp's controller-driven menu should appear. If it doesn't, here are the likely causes:
It's a 1.6 Xbox. This is the most common reason. As far as I know, Chimp was built for revisions 1.0–1.5 and doesn't work properly on 1.6 units, which use different hardware. If that's their revision, they need a different tool rather than a fix. (My searches didn't turn up a source confirming this, so treat it as likely rather than certain.)
No controller in port 1 at boot. Chimp is driven by the controller. They should plug it into port 1 before powering on and try pressing buttons at this screen, since the menu sometimes needs input to draw.
They want to reach it over the network instead. The screen gives the login. They can plug an ethernet cable from the Xbox directly into a PC, set the PC's IP to something like 192.168.0.10 with subnet 255.255.255.0, then telnet or FTP to 192.168.0.3 with username root and password xbox.
It's worth skipping Chimp entirely. Chimp is a 2000s-era tool, and most people now do HDD upgrades another way. They softmod with Rocky5's softmod installer, which backs up the EEPROM and can unlock the drive from the dashboard. Then they prepare the new drive on a PC with FATXplorer. This route is much less fiddly and works on 1.6 consoles.
Things to ask them before they go further:
Which Xbox revision it is (1.0–1.6). A 1.6 can be identified by a smaller power supply connector and an AV port without a separate hole next to it, or they can check the board.
What they're actually trying to do: HDD upgrade, EEPROM backup, or unlocking a locked drive.
How they booted Chimp: a softmod exploit, a burned disc, or a modchip.
Whether they already have a backup of their EEPROM. If they're messing with drive locking, they must not proceed without one, or they risk bricking the console's ability to read any drive.